Download CompactLogix™ System

Transcript
3-14
Communicating with Devices on an EtherNet/IP Network
Producing and
Consuming Data
The 1769-L32E and 1769-L35E controller supports the ability to
produce (broadcast) and consume (receive) system-shared tags over
an EtherNet/IP link. Produced and consumed data is accessible by
multiple controllers over an Ethernet network. The controller sends or
receives data at a predetermined RPI rate. This is the recommended
method of communication between Logix controllers.
Produced and consumed tags must be controller-scoped tags of DINT
or REAL data type, or in an array or structure.
Tag type:
Description:
Specify:
produced
These are tags that the controller
produced for other controllers to consume.
• Enabled for producing
• How many consumers allowed
consumed
These are tags whose values are produced
by another controller.
• Controller name that owns the tag that the local controller
wants to consume
• Tag name or instance that the controller wants to consume
• Data type of the tag to consume
• Update interval of how often the local controller consumes
the tag
The producer and consumer must be configured correctly for the
specified data to be shared. A produced tag in the producer must be
specified exactly the same as a consumed tag in the consumer.
If any produced/consumed tag between a producer and consumer is
not specified correctly, none of the produced/consumed tags for that
producer and consumer will be transferred. For example, if a
CompactLogix controller is consuming three tags that another
controller consumes but the first tag is specified incorrectly, none of
the tags are transferred to the consuming CompactLogix controller.
However, one consumer failing to access shared data does not affect
other consumers accessing the same data. For example, if the
producing CompactLogix controller from the previous example also
produced tags for other consuming controllers but did so correctly,
those tags are still transferred to the additional consuming controllers.
Maximum number of produced and consumed tags
The maximum number of produced/consumed tags that you can
configure depends on the connection limits of the Ethernet port on
the controller. You can have a maximum of 32 connections through
the Ethernet port.
Each produced tag uses one connection for the tag and the first
configured consumer of the tag. Each consumer thereafter uses an
additional connection.
Publication 1769-UM011B-EN-P - March 2004