Download procedure - Pro

Transcript
Chapter 4 - Screens
4.2 Project Editing
PROCEDURE
REMARKS
(1) Via the Project Manager, click on the
icon, or select the [Project] menu - [Change Device/PLC Type]
command.
Do not open screens other than the
Project Manager. Doing so will disable the selection of the Device/PLC
Type.
(2) Select either "No" or "Yes" for serial interface selection.
The initial setting of serial interface
selection is "No". Select "No" or "Yes"
only when the GP2000 Series is used.
Changing the Device/PLC type
(3) To change the Device/PLC type, click on the desired
GP type.
4-24
GP-PRO/PB III for Windows Ver. 6.3 Operation Manual