Download USER`S MANUAL

Transcript
"Time/date in gateway: 03:45. Expected by workstation: 04:10. Set
to time/date expected by workstation?"
"Trend - Invalid Channel No. User attempted to obtain trend from
channel that does not exist in FB. Rerun command using proper
syntax."
"Trend - Point not in FB. User attempted to obtain trend from point that
does not exist in FB. Rerun command using proper syntax."
"Trend - Upload Error. The specified trend could not be uploaded
because of communications problems. Disconnect, reconnect, and retry
the operation."
"Trend - Upload Error. The specified trend could not be uploaded
because of communications problems. Retry the operation, or verify
module communications."
"Trend Error - Invalid Channel No. User attempted to obtain trend from
channel that does not exist in FB. Rerun command using proper
syntax."
"Trend Error - Point not in FB. User attempted to obtain trend from
point that does not exist in FB. Rerun command using proper syntax."
"Trend Error. Channel 41, expander 0 (DAMPER) not trending.
Change Trend parameter for trend point to YES; or free up module
memory by setting Trend parameter for unneeded trend points to NO."
"Trend Error. CM 8, FB 2, Expander 0, Channel 41 (DAMPER) has an
invalid trend."
"Trend Error. Problem: CM 8, FB 2, Expander 0, Channel 41
(DAMPER) not trending. Suggestions: Change Trend parameter for
trend point to YES; or free up module memory by setting Trend
parameter for unneeded trend points to NO."
"Trend Error. The trend custom beginning time must be less than the
trend custom ending time. Change the beginning and/or ending time."
"Trend Error. The trend range minimum must be less than the trend
range maximum. Change the trend range minimum and/or maximum."
8-10 • Appendix A
SiteScan 2000 for Windows User’s Guide