Download USER`S MANUAL
Transcript
"Time/date in gateway: 03:45. Expected by workstation: 04:10. Set to time/date expected by workstation?" "Trend - Invalid Channel No. User attempted to obtain trend from channel that does not exist in FB. Rerun command using proper syntax." "Trend - Point not in FB. User attempted to obtain trend from point that does not exist in FB. Rerun command using proper syntax." "Trend - Upload Error. The specified trend could not be uploaded because of communications problems. Disconnect, reconnect, and retry the operation." "Trend - Upload Error. The specified trend could not be uploaded because of communications problems. Retry the operation, or verify module communications." "Trend Error - Invalid Channel No. User attempted to obtain trend from channel that does not exist in FB. Rerun command using proper syntax." "Trend Error - Point not in FB. User attempted to obtain trend from point that does not exist in FB. Rerun command using proper syntax." "Trend Error. Channel 41, expander 0 (DAMPER) not trending. Change Trend parameter for trend point to YES; or free up module memory by setting Trend parameter for unneeded trend points to NO." "Trend Error. CM 8, FB 2, Expander 0, Channel 41 (DAMPER) has an invalid trend." "Trend Error. Problem: CM 8, FB 2, Expander 0, Channel 41 (DAMPER) not trending. Suggestions: Change Trend parameter for trend point to YES; or free up module memory by setting Trend parameter for unneeded trend points to NO." "Trend Error. The trend custom beginning time must be less than the trend custom ending time. Change the beginning and/or ending time." "Trend Error. The trend range minimum must be less than the trend range maximum. Change the trend range minimum and/or maximum." 8-10 • Appendix A SiteScan 2000 for Windows User’s Guide