Download Crack Sealer
Transcript
Crack Sealer October 2006 Lesson Three b. Hoses Figure 3-1 i. Check the hoses circulating coolant to and from the engine and radiator ii. Check the hydraulic hoses with a clipboard or other solid object for any cracks or pin holes a) Never use bare hands to check hydraulic lines b) Hydraulic systems are pressurized, and can cause serious injury if fluid is injected into the skin c. Air compressor (if equipped) i. Check the oil level to make sure it is at the proper level ii. Ensure the air compressor is firmly secured to the crack sealer iii. Open the drain valve at the bottom of the air tank and allow all water accumulated to drain, if so equipped iv. Check all air lines and connections for cuts or leaks 36 Office of Training: Equipment Training Section