Download Crack Sealer

Transcript
Crack Sealer
October 2006
Lesson Three
b. Hoses
Figure 3-1
i. Check the hoses circulating coolant to and from the engine and
radiator
ii. Check the hydraulic hoses with a clipboard or other solid object
for any cracks or pin holes
a) Never use bare hands to check hydraulic lines
b) Hydraulic systems are pressurized, and can cause serious
injury if fluid is injected into the skin
c. Air compressor (if equipped)
i. Check the oil level to make sure it is at the proper level
ii. Ensure the air compressor is firmly secured to the crack sealer
iii. Open the drain valve at the bottom of the air tank and allow all
water accumulated to drain, if so equipped
iv. Check all air lines and connections for cuts or leaks
36
Office of Training: Equipment Training Section