Download User Manual

Transmission Service Procedure
Inline Exchange
Connection to Vehicle using H-Adapter
1. Connect appropriate adapters to vehicle transmission cooler lines. Attach opposite ends to Hadapter. Ensure valve is partially open.
2. Start the vehicle.
3. Determine ATF flow direction then fully open H-adapter valve.
4. With the male to male couplers connected to the TransTech IV hoses, attach the INLINE
RETURN hose to the transmission output side of the H-adapter. Attach CLEAN FLUID hose to
the transmission return side of the H-adapter valve.
5. Close valve on H-Adapter.
11