Download CONTROLLER SERIES USER MANUAL

C ONTROLLER 3000 S ERIES
Subscriber Trace
U SER M ANUAL
Check the Subscriber Trace to enable the Subscriber Trace
function. This will provide the logged in and logged out time of
the subscriber once the user logs out.
Access Point Alarm
When this is checked a log would be sent if one of the LAN
Devices detection results is "Fail".
Syslog Level
One or all the options can be chosen out of Error, Warning,
Information, and Debug.
1. Checking the ‘Error’ option will automatically check only for
Errors in Syslog.
2. Checking the ‘Warning’ option will automatically check only
for Warnings and Errors.
3. Checking the ‘Information’ option will automatically check
only for all Syslog Attributes.
4. Checking the ‘Debug’ option will display debug messages in
the controller. The debug output will generate a large volume
of SysLog traffic and should only be used if you are having
trouble with the Controller.
©2008, VALUEPOINT NETWORKS, INC. ALL RIGHTS RESERVED
P AGE 60
OF
96