Download TDC-V4 - lumat

12.
DLL Functions
This chapter helps to use DLL Functions supplied with TDC-V4 board for C/C++ software.
This DLL was developed by ISITech company and TDC-V4 is compatible with it. An optimized
DLL will be developed later.
12.a. required files
For C/C++ software, the following files enclosed in the DLL folder of the TDC-V4 Package,
must be included into the program :
 isitime_dll.dll : DLL file
 import_dll.h : header file
 isitime_dll.lib : resource file
12.b. functions
 Driver opening :
Void OuvertureDriver(char *flag, unsigned long vID, unsigned long dID, int mc)
To be used during each program launching. This function needs the following parameters :
 flag returns the value 20 if the function is successful
 vID = 0x10B5
 dID = 0x5406
 mc = -1
 Driver closing :
Void FermetureDriver()
To be used during each program exit.
 Writing into a register :
Bool Data_Ecriture(int *buffer, int taille, unsigned long adresse, int mode)
To be used to write into the Mode and Command registers :
 buffer : data word (32 bits wide)
 size = 1
 address : report to summary chapter 14
 mode = 6
TDC-V4 – User Manual
40