Download Micro-EX User Manual
Transcript
Micro-EX User Manual May 6, 2014 Appendix D – Installing RS485 Communications RS485 Communications There are two ways to connect your computer to the Mallincam Micro-EX. The first way is through a USB direct to MallinCam Micro-EX cable, and the second way is through a connection path USB to RS232 Serial Adapter -> RS232 to RS485 plug -> Micro EX RS485 cable. Either technique works well, and the method of choice depends upon your preference. For more information visit either The Mallincam Website (www.Mallincam.net) or the Zengineering Website (www. http://zengineering.us/. USB Direct to Mallincam Micro-EX cable This may be the easiest way to communicate between the Micro EX and your computer. Install the drivers that came with the product. Plug in the cable. Visit the Device Manager in Windows to check what Com Port the cable will use. Match the Com port on Stephane’s Micro-EX Connect and use. Using a USB to RS232 Adapter Most of us already have a USB to RS232 Adapter, so this connection path will be the one you may end up using so detailed instructions are provided. To USB Port on Computer Micro-EX User Manual Page 68