Download Hardware User Manual






USB
o
Supports up to 915kbps UART-USB conversion.
o
Emulates a standard COM port on the computer.
o
Drivers for Windows and Linux available
o
JTAG-Plug that supports all analog Devices JTAG Emulators.
JTAG
Expansion Connector 1
o
SPORT 0
o
UART
o
SPI
o
PPI1 (Parallel Port Interface 1)
o
PFs (Programmable Flags)
Expansion Connector 2
o
Data Bus
o
Address Bus
o
Memory Control Signals
o
PPI21 (Parallel Port Interface 2)
o
Power Supply
2nd USB Connector (optional)
o


RJ-45 Ethernet Plug
o
Only in combination with the CM-BF527 and the CM-BF537E module
o
Standard 10BaseT/100BaseT Ethernet connection
External Power Supply
o
1
Can only be used together with the CM-BF527 including USB2.0 OTG interface or the CM-BF537U
Core Module which has an on-board NETPLX 2272 USB2.0 Device Chip.
The board is shipped with a 12V, 2A external DC/DC Power Supply
Only available when using the CM-BF561 Core Module
DEV-BF5xxDA-lite V5.x Hardware User Manual 8