Download 33.3 - NIBE

To Installers
Boiler Installation
Boiler Regulator Settings
The first boiler start-up requires enabling some features and entering some parameters. E.g. heating temperature sensor
should be activated and the flow temperature set.
Step
1. Push ENTER on the Home screen to enter the Home menu.
Menu
TURNED OFF
Fr
12:05
33.3 60
M
OFF
2. The Home menu contains the CENTRAL HEATING option. Open it
by pressing ENTER.
3. By means of UP and DOWN arrows, select the desired section.
4. After selecting the desired section, open with ENTER.
0
38
CENTRAL HEATING
C.H. SELECT
20:54
CIRCUIT NO: 1
Kitchen
5. By means of UP and DOWN arrows select the SERVICE option.
6. Open the SERVICE option by pressing ENTER.
The SERVICE menu is password-protected.
The password consists of the boiler temperature setpoint and the
letters EST (e.g. If the boiler tempearture is preset to 70 °C, then
the password is: 70EST).
For more details on using password, see page 26.
22
CH 1
20:54
SERVICE
PELLUX 100/20, PELLUX 100/30