Download your easywind software manual

EasyWind
Software Manual
INSTALLATION
SENSOR CONNECTION
1.
Unscrew sensor base from sensor.
2.
Pass power connector to sensor through the sensor base.
3.
Connect power connector to sensor.
4.
Screw sensor base to sensor.
1.
2.
3.
3.
SENSOR PLACEMENT
1.
Fix the sensor base upon a wind mast in the support boat.
2.
Make sure the sensor dent exactly matches the bow of the support boat.
3.
In order to ensure this, once EasyWind is connected and working, GOTO the ​
BOAT CONDITIONS MENU,
and, check that the boat’s heading (not COG) matches a manual compass reading or known bearing.
2.
Version 1.3
3.
6 / 28