1
Download PowerMonitor 3000 User Manual - Mid
Transcript
Sample Applications 275 Data Tables In the SLC 500 data tables, table N111 is the destination table for the Read message and N211 is the source for the Write message. Table N211 contains the following values for setting the date and time in a power monitor with a password of 0 to January 1, 2003 at 12:00 midnight. Table N211 The Read Clock from PM3K and Set Clock from SLC bits are used to initiate the messages, and are reset when the message instruction either completes successfully or an error occurs. In your application code, if the message rungs are controlled programmatically, be sure that only one message is enabled at a time. Publication 1404-UM001E-EN-P - October 2006
