Download User`s Manual

Example
Command
Example
DI7
DI6
DI5
DI4
DI3
DI2
DI1
DI0
Bank switching
Switching to bank 2.
0
1
0
0
0
0
1
0
Bank group switching
Switching to bank group 2.
1
1
0
0
0
0
1
0
Model re-registration
Re-registering the model of item 6
1
0
0
0
0
1
1
0
Output Signal
Measurement results are output each time a measurement is made. Measurement values and judgment
results can be output as the measurement results.
Up to 32 data are output respectively (except for overall judgment result outputs.) They are output for the
number of times in the expression set at “Calculation“.
Expression
Ṷ▚
ᄌᢙ000
ᄌᢙ001
ᄌᢙ002
Data
31
ᄌᢙ127
Data output
Only the preset data is output.
For example, only data 0 and data 7 are
output when data 0 and data 7 is set.
䍡䍼䍎䍞000
䍡䍼䍎䍞001
䍡䍼䍎䍞002
Judgment
31
䍡䍼䍎䍞127
Judgment
output
Only the preset judgment is output.
For example, only judgments 0 to 15 are
output when judgment 0 is set, and the
remaining judgment results are not output.
6
್ቯ000
್ቯ001
್ቯ002
Variable
31
್ቯ127
PARALLEL INTERFACE
Data is output only when the ZFX-C is in the RUN mode; data is not output when the ZFX-C is in ADJ mode.
p.100
Note
After measurements have been made in the RUN mode, the data that is output to the OR and DO signals is retained
until new measurements are made in the RUN mode. The status of these output is retained even if the ZFX-C is
switched from the RUN mode to another Mode.
ZFX-C User’s Manual
Signal I/O
141