Download User`s Manual
Transcript
Region settings Set the measurement region. X MENU mode - [Setup] - [Item] - [Region] Item Description Measurement Region This function sets the region to be measured. Setting the Region p.182 Inspection is classified into the following four inspections for each region setup. • Line Select this item to inspect measurement targets for chipping, burrs and other defects. The shape that can be drawn is one straight line. 3 Measurement Region SETTING THE MEASUREMENT CONDITIONS • Circum/Arc Select this item to inspect round measurement targets for chipping, burrs and other defects. The shape that can be drawn is one circumference or arc. Measurement region • Area Select this item to inspect the entire measurement target for scratches and dirt. A combination of up to five shapes (rectangles, ellipses, circles, polygons). Measurement region Reference registration When the measurement region is set, measurement is executed on the display image, and the result of execution is registered as the reference value. To re-register only reference values, you can use this function to re-register only reference values based on the image currently on screen. Threshold This function sets the judgment conditions. X MENU mode - [Setup] - [Item] - [Limits] Setup Item Description Defect Sets the defect judgment value to be judged as OK. Range: 0 to 255 Density Sets the density range to be judged as OK. Range: 0 to 255 Number of defects Sets the range of number of defects to be judged as OK. Range: 0 to 255 ZFX-C User’s Manual Setting Measurement Items 81