Download ControlNet Communication Card

4-14
Install and Use the 1784-PCC Card in Windows NT
6. To determine if you have an I/O conflict, click the I/O port button.
7. View your I/O assignments.
If you have any devices that have the same I/O location, run the 1784-PCC
configuration utility described on page 4-14 and change the I/O location of
the 1784-PCC card.
Run the 1784-PCC Configuration Utility for Windows NT
To view and change your PCC card resource configurations, run the configuration
utility that we provide on the installation utility disk.
IMPORTANT
The PCC_Config utility does not work with CardWare. If you
have an unresolved resource conflict, contact your computer
manufacturer.
Publication 1784-IN034D-EN-P - June 2002