Download Operation manual

June 2013 Version 9.6.03
operating manual.
Regular maintenance.
The Smart-Fill is relatively maintenance free. However there are a few items which may
require attention occasionally.
Enclosure cleanliness.
The Smart-Fill enclosure should be kept as clean as possible.
Sensor cleanliness.
The sensors where the vehicle key is touched on should be kept clean.
If electrolysis is allowed to form on the surfaces around the studs, then the keys may not read
correctly in damp / wet weather.
Keypad cleanliness.
The keypad silicon rubber cover should be kept clean, and free of petroleum products.
The silicon cover will handle most dirt and grime well, but it will swell up and fail if it becomes
‘wet’ with petroleum product. NEVER use solvents for cleaning, use only a weak detergent mix.
The keypad numbers (tiles) may be replaced if necessary without changing the whole keypad.
You can purchase new tiles (numbers) for the keypad if the old numbers have worn off.
The old tiles are removable, so you don’t need to replace the whole keypad.
Smart-Fill Fuel Management Systems
8