Download Datasheet - Test Equipment Depot

LV 5750
Portable Multi SDI Monitor
Specifications
Video Formats and Corresponding Standards
Video Signal Standards
Compact Flash Memory Card Unit
Function:
Saves screen captures, error logs, preset
data, and data dumps
Format
Standard Supported
Remote Control Unit (Sold Separately)
1
1080i/60
Function:
Recalls presets and outputs alarms
2
1080i/59.94
Control connector:
D-sub 25 pin 1 connector (female)
3
1080i/50
*If you install this unit, you will not be able to use the compact memory card
4
1080p/30
SMPTE 274M, 292M
unit that comes standard or the Ethernet unit that is sold separately
5
1080p/29.97
Ethernet Unit (Sold Separately)
Function:
Remote control from an external computer
6
1080p/25
Type:
10BASE-T/100BASE-TX Auto switching, one
7
1080p/24
connector
8
1080p/23.98
*If you install this unit, you will not be able to use the compact memory card
9
1080PsF/30
unit that comes standard or the Ethernet unit that is sold separately
10
1080PsF/29.97
Display Format
11
1080PsF/25
SMPTE RP211, 292M
Display Format:
XGA Effective area 1024 x 768 dots
12
1080PsF/24
Display:
13
1080PsF/23.98
1 Screen Display:
Waveform display, vectorscope display, picture
display, audio display, or status display
14
720p/60
2 Screen Display:
Waveform and vectorscope display, waveform
15
720p/59.94
display and picture display, or waveform display
16
720p/50*
SMPTE 296M, 292M
and audio level display
17
720p/24*
4 Screen Display:
Select audio display or status display in addition
18
720p/23.98*
to waveform display, vectorscope display, and
19
252i/59.94
SMPTE 259M
picture display
20
625i/50
Waveform Display
Waveform Operation
* Will be available in the future
Display Mode:
Overlay display: Displays component signals
in overlay
Other Standards
Parade display: Displays component signals
● Ancillary data standard:
SMPTE 291M
side by side
● Embedded audio standard: HD-SDI SMPTE 299M
Timing Display:
Displays by calculating Y-CB and Y-CR
SD-SDI SMPTE 272M
Uses bowtie signals
Format Setting
(authorized by Tektronix, Inc.)
SDI Signal:
Auto setting or manual setting from the
EAV-SAV Period:
Select show or hide
supported formats
G, B, R, Conversion:
Converts YCBCR signals into RGB or YRGB
Sampling Frequency:
74.25 MHz (HDTV),
and displays the result
74.25/1.001 MHz (HDTV)
Pseudo-Composite Display: Artificially converts component
13.5 MHz (SDTV)
signals into composite
4:2:2 YCBCR signal
signals and displays the result
External Synchronization:
Auto setting from supported formats
Channel Assignment:
Select G, B, R order or R, G, B order during
Input/Output Connector
G, B, R conversion display
SDI Input
Line Select:
Displays the selected line
Input Connector:
2 BNC connectors 2 systems
Vertical Axis
(A/B switching type)
Gain:
Select x1, x5, or variable (up to x10)
External Synchronization Input
Amplitude Accuracy:
<± 0.5 %
Input Signal:
Tri-level or NTSC/PAL black burst
Horizontal Axis
Input Connector:
1 system 2 BNC loop through connectors
Line Display:
Display format Overlay: 1H, 2H
SDI Output
Parade: 1H, 2H, 3H
Output Connector:
1 BNC connector
Timing: 2H
Headphone Output
Magnification
Select
x1 or x10
Output Signal:
Separates and outputs the embedded audio
Field Display:
Display Format: Overlay: 1V, 2V
signal in the SDI signal
(2V display not allowed for progressive)
IF Slot
Parade: 1V, 2V, 3V
Installable Units:
One of the following can be installed:
Magnification
Select
x1, x20 or x40
compact flash memory card unit (standard),
Time Base Accuracy:
<± 0.5%
remote control unit (sold separately), and
Cursor Measurement
Ethernet unit (sold separately)
Configuration:
Horizontal:
2 cursors (REF and U)
Vertical:
2 cursors (REF and U)
Leader Instruments Corporation
6484 Commerce
Drive,www.testequipmentdepot.com
Cypress, CA 90630
Test Equipment
Depot
Toll Free: 1 99
(800)
645-5104
● Phone 1 (714) 527-9300
● Fax 1 (800) 527-7490
Washington
Street
800-517-8431
● E-mail:781-665-0780
[email protected]
web:
www.LeaderUSA.com
Melrose,
MA 02176-6024
FAX