Download "user manual"

System
Delete
... deletes the selected file name from the assignment list
Structure of the reference list (file PLCPROG.LST)
It is divided into 3 areas:
Number
Area
Degree of protection
1 ... 100
User area
User
101 ... 200
Machine manufacturer
Machine manufacturer
201 ... 255
Siemens
Siemens
The notation is carried out for each program by lines. Two columns are intended per line,
which must be separated from each other by TAB, space or the ”|” character. In the first column, the PLC reference number must be specified, and in the second column, the file name.
Example:
Edit PLC
alarm txt
1 | Welle.mpf
2 | Kegel.mpf
This function can be used to insert or modify PLC user alarm texts. Select the desired alarm number
using the cursor. At the same time, the text currently valid is displayed in the input line.
Fig. 7-24
Editing the PLC alarm text
Enter the new text in the input line. Press the Input key to complete your input and select
Save to save it.
For the notation of the texts, please refer to the Start-Up Guide.
Data I/O
7-114
The window is divided into two columns. The left column is used to select the data group, and the
right-hand column is used to select individual data for transfer. If the cursor is positioned in the left hand column, the whole data group is output when Read out is selected. If it is positioned in the
right-hand column, only the selected file is transferred. You can use the TAB key to switch between
the two columns.
SINUMERIK 802D, 802D base line
6FC5 698-2AA00-0BP3 (11.03) (OP-T)