1
Download IDEC SmartRelay Series Manual
Transcript
Installing & Wiring the IDEC SmartRelay 2.2.2 Wall-Mounting Before you wall-mount the device, the mounting slides at the rear of the device must be pushed towards the outside or the inside. Insert the upper mounting slide (included with the modules) and push the lower one to the outside. You can the fasten the IDEC SmartRelay with two O 4-mm screws (tightening torque 0.8 to 1.2 N/m) to the bracket to mount it on the wall. Mounting slides IDEC SmartRelay User’s Manual 2-9
