Download User Manual - TR Electronic

Parameterization and configuration
7.1 Overview
Configuration Operating parameters
*·Length Features
PNO Class 1
Page 22
- Code sequence
16 bit IN
PNO Class 1
Page 23
- Code sequence
32 bit IN
-
No measuring system scaling, the measuring
system has the base resolution according to the
nameplate
-
16 byte diagnosis data
-
Code sequence
- Code sequence
PNO Class 2
Page 24
- Class 2 functionality
- Scaling function
16 bit IN
16 bit OUT
- Total measuring range
- Code sequence
PNO Class 2
Page 26
- Class 2 functionality
- Scaling function
-
Measuring system scaling is possible
-
Preset adjustment via the bus
-
Code sequence
32 bit IN
32 bit OUT
- Total measuring range
- Code sequence
TR-extended
32 Bit
Page 28
- Class 2 functionality
- Scaling function
32 bit IN
32 bit OUT
- Diagnostic alarm
-
Measuring system scaling possible
-
Preset adjustment via the bus
-
Code sequence
-
Preselection of the values for the external Preset
inputs, depends on the type of measuring
system
- Total measuring range
- Preset value
- Code sequence
TRextended+Speed
32 Bit
Page 31
- Class 2 functionality
- Scaling function
- Diagnostic alarm
- Total measuring range
- Preset value
- Speed resolution
32 bit IN
16 bit IN
32 bit OUT
-
Measuring system scaling possible
-
Preset adjustment via the bus
-
Code sequence
-
Preselection of the values for the external Preset
inputs, depends on the type of measuring
system
-
Speed output
* from the bus master perspective
© TR-Electronic GmbH 2007, All Rights Reserved
Printed in the Federal Republic of Germany
08/08/2007
TR - ELA - BA - GB - 0001 - 05
Page 21 of 50