Download Performance Technologies CPC358 Manual

Transcript
Chapter 7: System Management Bus and Intelligent Platform Management
The Response Message for the Set Card Power State command is formatted as Table 7-20 on
page 167 with the following additions outlined in Table 7-28 below.
Table 7-28: Set Card Power State Response Message
Byte
Response Field
Description
8
Checksum #2
Checksum of bytes 4 - 7
Get Card Power State
This OEM command returns to the Requester the Card Power and Control signals. The
CONTROLLER_POWER and HOT_SWAP_LED are encoded in a single byte and returned to
the Requester in the Response Data.
The Request Message for this command is formatted as in Table 7-19 on page 167, with the
addition of one more byte definition, as per Table 7-29 below.
Table 7-29: Get Card Power State Request Message
Byte
Request Field
Description
7
Checksum #2
Checksum of bytes 4 - 6
The Response Message for the Set Card Power State command is formatted as Table 7-22 on
page 168 with the following additions outlined in Table 7-30 below.
Table 7-30: Get Card Power State Response Message
Byte
Response Field
Description
8
Card Power State Byte
As per Table 7-26 on page 169
9
Checksum #2
Checksum of bytes 4 - 7
170
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com