Download User Manual

4
Configuring PCL Printer Driver Properties for Windows
Configuring print driver settings
1 On the [Job Management] tab, select the [Lock Job] check box.
2 Type the user password into the password box.
3 Send the print job.
Performing the required operation on the machine
1 Touch [Job List] and then select the [Print] tab.
2 Touch [To Be Printed PC].
3 Use [↑] and [↓] to select the job you want to unlock.
4 Touch [Unlock].
5 Use the 10-key pad to input the password, and then touch [Enter].
6 The job prints if the input password is correct.
Reprint
This setting can be used to configure reprint settings from the printer
driver.
After checking the printed results of a job, you can perform a machine
control panel operation to print additional copies.
Set the number of
additional copies.
Configuring print driver settings
1 From the [Job Life] list on the [Job Management] tab, select [Reprint].
2 Send the print job.
Printer Controller
4-25