Download Breeze-3
Transcript
Horn/Buzzer (in certain models only) Headlight Switch Hazard Warning Charge Inhibit / Motor overheated Condition Indicator (5.9) Left(5.4) Leds signing will operate respectively. A warning buzzer also sounds (in certain models only and subject to local ordinances). Push one of the 2 Buttons (1.14) activates the buzzer. The buzzer sounds automatically under the following conditions (subject to change where prohibited by law): 1. When reversing. 2. When operating the “Turn Signal Switch” (Right or Left). Remark: It is possible to change the Buzzer Functioning by changing a Dip Switch in the front Board .This have to be made by a trained technician. Turn on the Headlight with Light Switch (1.13). This switch activates both the Headlight and the Rear Lights. When Lights are activated the Light Led (5.6) is lit. The Hazard Button (1.16) operates all flashing lights on the Breeze. Pushing the button once turns the lights ON. A second push turns them OFF. When Hazard is activated all signaling Leds (5.3+5.4+5.6) are Flashing. When the Vehicle is being charged it is inhibited. In this condition the Inhibit Led (5.6) lit and no driving can be done. Also when the motor is overheated the Led (5.6) will blink. At this condition it is recommended to stop the Breeze and let the motor cool for a while. 17