Download the instructions for version 6
Transcript
Harrison R&D 281-751-8836 Houston, TX Commanded EGR – dismlay 0 hen the GR is commanded of, 100 hen the GR system is commanded on, and if the GR is duty cycled some here bel t een 0 and 100 . Commanded Equivalence Ratio – fuel systems that use conventional oxygen sensor dismlays the commanded omen loom equivalence ratio hile the system is in omen loom. Should remort 100 hen in closed loom fuel. To obtain the actual air/fuel ratio being commanded, multimly the stoichiometric A/F ratio by the equivalence ratio. For exammle, gasoline, stoichiometric is 1 .6 o1 ratio. If the fuel control system as command an equivalence ratio of 0.95, the commanded A/F ratio to the engine ould be 1 .6 * 0.95 = 13.9 A/F. Commanded Evaporative urge – dismlays 0 hen no murge is commanded and 100 at the maximum commanded murge mosition/ o . Commanded Throtle Actuator – dismlays 0 hen the throtle is commanded closed and 100 hen the throtle commanded omen. Control Module Voltage – mo er inmut to the control module. Normally the batery voltage, less any voltage drom bet een the batery and the control module. Distance Since DTCs Cleared – distance accumulated since DTCs ith a scan tool. here cleared Distance Traveled While MIL On – accumulates the vehicle distance traveled hile the MID light is illuminated. EGR Error – error as mercent of actual commanded GR. Negative mercent is less than commanded and mositive is more than commanded. Evap Srstem Vapor ressure – evamorative system vamor mressure normally obl tained from a sensor located in the fuel tank. Fuel Level Input – indicates the nominal fuel tank liquid fll camacity as a merl cent of maximum. Fuel Rail ressure – indicates the fuel rail mressure at the engine referenced to atl mosmhere (gauge mressure). Harrison R&D 16