Download ISP3-X manual PDF - E

Transcript
ISP3-X portable In-Circuit Programmer
OVERVIEW
In-Circuit Programming (ISP or JTAG) is the technology of the future, at least for small and medium series of
electronic components with embedded processors. With SMD parts there is a problem with programming
because many expensive and specialized socket adapters are required. An additional advantage of ISP/JTAG
is the practically unlimited reprogrammability of the CPUs .
This ISP-Programmer emphasizes minimum size, extensive software and ease of use. This manual is only
valid for the ISP3-X version of programmers.
FEATURES
· Connection to the PC through a USB port
· Works in USB-2 mode (high speed)
· Also USB-1 ports and HUBs can be used
· No power supply necessary. The unit is powered directly from PC-interface (USB) or the target.
· Adapts automatically to the target’s voltage (1.8-5.5Volt)
· Easy and extensive software
· Software runs under XP, Vista and Windows7,8 / 32 and 64 bit.
· Small, light weight and handy unit 100x55x20mm
· Supports all SPI, JTAG, TPI and PDI programmable AVRs
· Supports the SPI programmable AT89Sxx types
· Supports the Atmel AT89LPxx family
· Supports the ChipCon CC1110, CC2510 und CC2430 family
· Supports the Serial Flash (SPI-Flash) Families AT25DFxxx, S25FLxxx and SST25VFxxx
· Extremely fast. Programs a full Mega128 in 3sec (JTAG) and a Tiny44 in 1sec (16MHz)
· Programmable supply voltage (source) for the target system 1.8..5.5Volt 30mA..300mA
· Self update feature via the PC
· Supports JTAG, SPI, TPI and PDI programming of the AVRs
· Optional adapters available (not included)
· With the included support program PackProg it is also usable for small series production
· Very well suited for production programming by using high secure AES encryption
· Also processes AES encrypted project files (PAC) onboard
· Supports programming cycles limitation with AES-PAC files
E-LAB Computers
Overview and Features · 3