Download ISP3-X manual PDF - E
Transcript
ISP3-X portable In-Circuit Programmer OVERVIEW In-Circuit Programming (ISP or JTAG) is the technology of the future, at least for small and medium series of electronic components with embedded processors. With SMD parts there is a problem with programming because many expensive and specialized socket adapters are required. An additional advantage of ISP/JTAG is the practically unlimited reprogrammability of the CPUs . This ISP-Programmer emphasizes minimum size, extensive software and ease of use. This manual is only valid for the ISP3-X version of programmers. FEATURES · Connection to the PC through a USB port · Works in USB-2 mode (high speed) · Also USB-1 ports and HUBs can be used · No power supply necessary. The unit is powered directly from PC-interface (USB) or the target. · Adapts automatically to the target’s voltage (1.8-5.5Volt) · Easy and extensive software · Software runs under XP, Vista and Windows7,8 / 32 and 64 bit. · Small, light weight and handy unit 100x55x20mm · Supports all SPI, JTAG, TPI and PDI programmable AVRs · Supports the SPI programmable AT89Sxx types · Supports the Atmel AT89LPxx family · Supports the ChipCon CC1110, CC2510 und CC2430 family · Supports the Serial Flash (SPI-Flash) Families AT25DFxxx, S25FLxxx and SST25VFxxx · Extremely fast. Programs a full Mega128 in 3sec (JTAG) and a Tiny44 in 1sec (16MHz) · Programmable supply voltage (source) for the target system 1.8..5.5Volt 30mA..300mA · Self update feature via the PC · Supports JTAG, SPI, TPI and PDI programming of the AVRs · Optional adapters available (not included) · With the included support program PackProg it is also usable for small series production · Very well suited for production programming by using high secure AES encryption · Also processes AES encrypted project files (PAC) onboard · Supports programming cycles limitation with AES-PAC files E-LAB Computers Overview and Features · 3