Download SRX-Pro Mobile Remote App - Android

Configuring Remote Connection Settings
Enable video loss alarm. Tick the checkbox to enable an alert whenever Video Loss alarm has been detected on a
connected remote Server.
1.
Tick the Play a sound checkbox to enable a sound alert in response to Video Loss alarm detection on a connected remote
server.
Touch audio file... button to browse for the custom audio file to be played whenever the Video Loss alarm has been
detected.
Enable stop recording alarm. Tick the checkbox to enable an alert whenever connected remote Server has stopped
recording.
1.
Tick the Play a sound checkbox to enable a sound alert whenever connected remote Server has stopped recording.
Touch audio file... button to browse for the custom audio file to be played whenever the connected remote Server has
stopped recording.
Volume Level. Configure the volume level for audio alerts.
Select and click Save to save any changes made to this setup.
Select and click Reset Default to return all settings to factory default.
Frame per second
Note: This setting is available in the Online mode only.
Frame per second setting allows configuring the display frame rate for the SRX-Pro Mobile Remote app. This setting
will apply to all channels of the connected remote site.
The frame rate can be set from 1 fps to 30 fps.
The lower the frame rate, the choppier the video will appear. However, if your Connection is set to your device's data
plan, lower frame rate also means lower data usage.
The higher the frame rate, the more fluid the video will appear. The higher frame rate setting will also mean higher data
usage when the Connection is set to your device's data plan.
27