Download DropSense Integration Manual
Transcript
DropSense Integration Manual v0.9 6 Appendix 2 : list with status code 0 -1 1 -2 -3 3 -4 4 -5 -9 -10 -11 -12 -13 -14 20 21 -22 23 -24 25 30 31 -31 32 50 51 -52 52 -99 -100 -102 -103 -104 -200 999 Successful No access Access already achieved Not connected to DropSense Could not open tray Tray was already open Could not close tray Tray was already closed Tray not in right position Error reading experiment definition Error reading samples No pump profiles found No pump profiles found No samples defined Timeout for going to open tray position Access free Access and connection, no measurement Access and connection, measurement failed to initialize Access and connection, measurement started Access and connection, measurement failed Access and connection, measurement succesfull Access and connection, measurement initializing Access and connection, measurement busy Could not perform command, measurement busy Access and connection, load next DropFrame Access and connection, tray is open Access and connection, tray is closed Access and connection, could not perform command, tray is moving Access and connection, tray is moving Timeout: DropQuant not responding Access interrupted by local user interface Incorrect argument used, DropFrame ID not valid Incorrect argument used, DropFrame ID is already measured Results can only be exported if all DropFrames are measured Could not connect over TCP DropQuant Exit accepted Page 28 of 28