Download DropSense Integration Manual

Transcript
DropSense Integration Manual
v0.9
6 Appendix 2 : list with status code
0
-1
1
-2
-3
3
-4
4
-5
-9
-10
-11
-12
-13
-14
20
21
-22
23
-24
25
30
31
-31
32
50
51
-52
52
-99
-100
-102
-103
-104
-200
999
Successful
No access
Access already achieved
Not connected to DropSense
Could not open tray
Tray was already open
Could not close tray
Tray was already closed
Tray not in right position
Error reading experiment definition
Error reading samples
No pump profiles found
No pump profiles found
No samples defined
Timeout for going to open tray position
Access free
Access and connection, no measurement
Access and connection, measurement failed to initialize
Access and connection, measurement started
Access and connection, measurement failed
Access and connection, measurement succesfull
Access and connection, measurement initializing
Access and connection, measurement busy
Could not perform command, measurement busy
Access and connection, load next DropFrame
Access and connection, tray is open
Access and connection, tray is closed
Access and connection, could not perform command, tray is moving
Access and connection, tray is moving
Timeout: DropQuant not responding
Access interrupted by local user interface
Incorrect argument used, DropFrame ID not valid
Incorrect argument used, DropFrame ID is already measured
Results can only be exported if all DropFrames are measured
Could not connect over TCP
DropQuant Exit accepted
Page 28 of 28