Download User Manual - Abstract Micro Systems

Transcript
5 Scenario Editor
Figure 2: Scenario Editor Console
The main controls on the Scenario Editor Console are designed to correspond with the
worksheets, columns and rows of a scenario workbook. The section at the top of the dialog box
contains information found on the General worksheet. The data grids that follow have a one-toone correspondence to the other input worksheets. Finally, there are a set of four command
buttons at the bottom of the Scenario Editor screen that dictate what should be done with the data
just entered.
Below the buttons at the top of the window are eight data grids for various types of data entry.
These eight data grids correspond to various worksheets within the scenario workbook. If you’d
like to see more of a data grid, click on the full screen icon in the top right corner of the window.
If the grid still is not as large as you would like, click on the blue header box at the top of the data
grid to expand it. In general, the active field is indicated with an arrow while an asterisk denotes
the next available row for an insertion.
There are two general types of data grids: dimension grids and detail grids. The dimension grids
provide information about the categories, for example, the sites, agent groups and contact types.
The detail grids contain the details about each of those categories, for example, the staffing by
time of day for each agent group. The five dimension grids are the Routings, Sites, Agent
Groups, Workload Sources and Contact Types grids. The three detail grids are the Workload
Detail, the Staffing Detail, and the Routing Detail grids.
At the bottom of the Scenario Editor window are four buttons that control exiting and saving.
4/24/2008
23