Download Full resolution

Transcript
Instruction Manual
Pediatric HAL® S3004/S3005
9. Now select ‚Subnet mask‛. It should auto fill itself with 255.0.0.0. Ensure everything else is
empty/blank and click ‚OK‛.
This process has to be repeated on the each computer you are trying to connect to the
GaumardUI. Remember to name the network exactly the same, but when you setup the
IP addresses make sure they are different.
10. Following the IP address configuration, go to the ‚HAL® Virtual Monitor Set Up‛ dialog box
by clicking on Monitors, Configuration on the GaumardUI.
On this dialog box, select the ‚Adapter‛ you will be using (usually the wireless adapter).
244
Copyright 2010 by Gaumard Scientific. All rights reserved.