Download Chapter 1 Getting Acquainted

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Key Hardware Features
Before you install and connect your bridge, take a moment to become familiar with its front and
back panels—especially the status light and Push N Connect push button on the front panel.
Front Panel
The lights on the front panel indicate the operating status of the bridge.
Illuminated Power LED
On – Amber
The unit is performing the power-on diagnostic tests.
On – Green
The power is on and the router is ready.
Fast blink – Green
A software update is in progress.
Slow blink – Green
There is a problem with the wireless router software.
Off
Power is not being supplied to the unit, the wireless radio is
turned off, or the LED push button switch on the back is off.
Illuminated WPS Push 'N' Connect Button
On – Amber
The unit is performing the power-on diagnostic tests.
On – Green
The wireless range extender has acquired an Internet
address.
Blink – Green
Data is being communicated with the Internet.
Off
Power is not being supplied to the unit, or the LED push button
switch on the back is off.
Figure 1-1
Note: Pressing the LED On/Off button on the back of the unit turns off all the LEDs, including the
these on the front (Power, and WPS), as well as those on the rear (Ethernet status).
Getting Acquainted
1-3
v1.1, May 2008