Download Data Guide - Beam Communications

Disable SIM PIN
The SIM PIN prompt can be disabled so as to not prompt the user every time the unit is powered on.
Note that the following command will not work if the SIM PIN has not already been entered.
To disable the SIM PIN prompt, from the Hyperterminal prompt, type in the following:
AT+CLCK=”SC”,0,”<code>”
Where <code> is the current SIM PIN.
For example, if the SIM PIN was “1234” then to disable the prompt the following command would be
entered:
AT+CLCK=”SC”,0,”1234”
Beam Communications Data Guide – v1.1
14