Transcript
INKJET PRINTER 3G JET-OPAQUE® HEAT TRANSFER PAPER Product #9838P0 Designed for transferring inkjet images to dark or other colored garments and substrates. This product contains and opaque layer allowing for photograph quality images to be transferd. This product best used for images that contain white to be transferred onto dark garments. This product may be cut with a cutter/plotter, die and kiss-cut. Substrates include: T-shirts, sweatshirts, mouse pads, puzzles, and leather goods. RECOMMENDATIONS Product # Fabric Color 9838P0 Dark Hot Peel Warm Peel Cold Peel Hand Iron * *hand iron is NOT recommended however, may be hand ironed; the product will NOT be as durable when laundered. COMMERCIAL PRESS INSTRUCTIONS PRINTING INSTRUCTIONS: 1. Print image on coated side of paper right reading (do not mirror the image). 2. Trim away the unprinted areas of the transfer. PRE-TRANSFERRING INSTRUCTIONS: 1. Prepare the substrate by ensuring the surface is clean, dry and wrinkle free. TRANSFERRING INSTRUCTIONS: 1. Remove the backing paper from the printed image. 2. Place the Heat Transfer Paper on top of the garment with the image facing up (right reading to you). 3. Completely cover the image with an ironing sheet. 4. Place a piece of spare material over the ironing sheet. 5. Press: 30 seconds at 350°F using medium pressure. 6. Once cold peel away ironing sheet in a smooth even motion. WASHING INSTRUCTIONS: Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low-heat setting. Do not iron directly on the transferred area. IMPORTANT: Heat presses vary in accuracy. The sellers and manufactures maximum obligation shall be to replace any paper that has proven to be defective. www.Neenah.com/Technical/HeatTransfer
