Download Traction Inverter Module - Li

Transcript
1.
SAFETY INFORMATION
Before install and use the product read these handbook carefully, this must be available at all people that are
had deal with the installation and setting of the powertrain.
Installation, cable and cover opening of the device shall be made without voltage.
Any operation inside the device should be made without voltage. Because of capacitors, please verify with a
tester before operating inside the device.
All responsibility will be forgone if the apparatus is used inappropriately or in a different way than is advised in
the manual.
Any modification or operation that is not included in the manual is not permitted without the manufacturer’s
authorisation and must be carried out by qualified personnel.
The proper working and life of the device are dependant on the maitenance of the ambient temperature within
the allowed ranges of values.
Switch off the system before open the cover, and check with multimeter the absence of voltage.
Please attention electronic components sensible at electrostatic discharge ESD present inside, to use all one’s
cunning for avoid damage.
The use of this device can be dangerous because make turn the motor and relative connection and inside the
system there are high voltage.
The device and the manual are subject to change without notice.
MES-DEA disclaim all responsibility for every improper use of this device different that write in this manual.
WARNING !!!
Before activation for the first time, it is advised to lift the vehicle off the ground, as a
wrong connection of the accelerator or an incorrect software configuration may
start the vehicle.
5