Download AS40 Autosampler Manual

1 • Introduction
1.4 Product Safety Information
This instrument is designed to comply with the requirements for
safety set forth in IEC 1010, Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use.
Sections of this manual are flagged with key words and symbols to
denote the nature of any hazard. These safety directives apply to all
operators and service personnel.
Indicates that the function or process of the instrument
may be impaired. Operation will not damage the instrument.
Example: A cap must be installed in each vial in order for
the AS40 to operate correctly.
Indicates a potential hazard to the operator, or damage to
the instrument or other property.
Example: Overtightening valve bolts may break them off.
Doc. 034970-02 6/94
1-3