1
Download WAFER-PV-D5252/D4252/N4552 SBC
Transcript
WAFER-PV-D5252/D4252/N4552 SBC Figure 4-6: LVDS Resolution Selection Jumper Location 4.5.5 CompactFlash® Master/Slave Selection Jumper Label: JCF1 Jumper Type: 2-pin header Jumper Settings: See Table 4-6 Jumper Location: See Figure 4-7 NOTE: To use SATA and CF, CF must be set as slave Sets the CompactFlash® slot as the IDE primary master or primary slave. Pin Description Closed Master Open Slave (Default) Table 4-6: CompactFlash® Master/Slave Selection Page 48
