Download 160-IB1 InterBus Communication Module
Transcript
Chapter 2 Quick Start for Experienced Users This chapter can help you start using the IB1 Communication Module. If you have installed or configured a network previously and are familiar with Allen-Bradley communication modules and drives, this information can help reduce the time of installation. If you are uncertain, use the full installation/configuration information beginning in Chapter 3. We base the procedures here on the assumption that you understand the basic concepts, know how to program the 160 Drive and understand electronic process control. Because it is a start-up guide for experienced users, this chapter does not contain detailed explanations about the procedures listed. It does, however, reference other chapters in this book where you can find more information. If you have any questions or are unfamiliar with the terms used or concepts presented in the procedural steps, always read the referenced chapters and other recommended documentation before trying to apply the information. This chapter contains the following information: • What tools and equipment you need. • How to install and wire the Communication Module. • System power-up procedures. Required Tools and Equipment Have the following tools and equipment ready: • 3.2 mm (1/8 in.) flat blade screwdriver.