Download User Manual - Schneider

Transcript
Configuration and Programming with Unity Pro
Name
CLOCK_FAILURE
CLOCK_NOT_SYNC
Type
Bit
Description
BOOL
1
2
 bit 1 = 1 & bit 2 = 1, since
If
power- on CRA adapter has not
received a response from NTP
server.
 bit 1 = 0 & bit 2 = 1, CRA
adapter has received a
response from NTP server in
the past but is not currently
receiving the time from the NTP
server
 bit 1 = 0 & bit 2 = 0, Time is
valid, CRA adapter is receiving
responses from the NTP
server.
BUFF_FULL
BOOL
3
The local drop event buffer is full.
TS_BUF_FILLED_PCTAGE
BYTE
—
This byte reports the percentage of
the local drop event buffer filled
(0...100).
TS_EVENTS_STATE
BYTE
—
Refer to Main States
(see page 64).
PORT1_LINK
BOOL
0
0 = Port 1 (ETH1) link is down.
PORT2_LINK
BOOL
1
0 = Port 2 link is down.
PORT3_LINK
BOOL
2
0 = Port 3 link is down.
ETH_BKP_PORT_LINK
BOOL
3
ETH_STATUS
(BYTE)
1 = Port 1 (ETH1) link is up.
1 = Port 2 link is up.
1 = Port 3 link is up.
0 = Ethernet backplane link is
down.
1 = Ethernet backplane link is up.
RPI_CHANGE
BOOL
4
RPI change: EtherNet/IP RPI
change is in progress (during
CCOTF).
(reserved bit)
—
6
—
GLOBAL_STATUS
BOOL
7
0 = At least 1 service is not
operating normally.
NOTE: Refer to the
SERVICE_STATUS byte
below.
62
1 = All services are operating
normally.
EIO0000001584 09/2014