1
Download Legal Information - Agilent Technologies
Transcript
CALL:TCHannel CALL:TCHannel[:ARFCn]:DCS Function GSM Sets/queries the channel number for downlink and uplink TCH for DCS band. See “Configuring the Traffic Channel (TCH)” on page 619. TCH ARFCN may be set and queried when the CALL:STATUS:STATE is idle or connected, see “CALL:STATus[:STATe]?” on page 366. Additional commands can be appended to aid in controller/Mobile Station synchronization. See “Call Processing Subsystem Overlapped Command Synchronization Commands” on page 33 for examples. GPRS Setting This command is not applicable to GPRS. range: 512 to 885 (default: 698) resolution: 1 Query range: 512 to 885 resolution: 1 *RST Setting 698 Programming Example OUTPUT 714;”CALL:TCHANNEL:ARFCN:DCS 512” CALL:TCHannel[:ARFCn]:EGSM Function GSM Sets/queries channel number for downlink and uplink TCH for EGSM band. See “Configuring the Traffic Channel (TCH)” on page 619. TCH ARFCN may be set and queried when the CALL:STATUS:STATE is idle or connected, see “CALL:STATus[:STATe]?” on page 366. Additional commands can be appended to aid in controller/Mobile Station synchronization. See “Call Processing Subsystem Overlapped Command Synchronization Commands” on page 33 for examples. GPRS Setting This command is not applicable to GPRS. range: 0 to 124 | 975 to 1023 (default: 30) resolution: 1 Query range: 0 to 124 | 975 to 1023 resolution: 1 *RST Setting 30 Programming Example OUTPUT 714;”CALL:TCHANNEL:ARFCN:EGSM 124” 372 S:\Hp8960\E1964A GPRS Mobile Test Application\A.00 Release\Reference_Manual\Chapters\hpib_call_tchannel.fm
