Download User Manual - MediaLB Interface Test Bench

MediaLB Interface Test Bench
V2.2.X
2.2 Features
2.2.1 General Features
•
Hardware setup to verify link-layer implementation of a MediaLB device
•
Test pattern generation and verification of the following data types:
o Control messages
o Asynchronous packets
o Synchronous streaming data
o Isochronous packets
o Combination of the above listed data types
•
Generation of the following MediaLB commands:
o NoData
o SyncData
o AsyncStart, AsyncContinue, AsyncEnd, AsyncBreak
o ControlStart, ControlContinue, ControlEnd, ControlBreak
o IsoNoData, Iso4Bytes, IsoSync4Bytes
o MOSTLock, MOSTUnlock, MLBReset
•
Generation of the following MediaLB RxStatus responses:
o ReceiverReady
o ReceiverBusy
o ReceiverBreak
o ReceiverProtocolError
•
Supported Setups:
o MediaLB Device Setup
o MOST150 Device Setup
•
Optical physical layer for MOST150 supported
•
MITB operates as MediaLB controller and MOST150 network master
•
GUI for test pattern configuration
•
GUI for remote configuration of MediaLB controller (INIC) connected to MDUT
•
GUI for test status visualization
User Manual
Page 16
Copyright © 2011 SMSC
Document Version: V2.2.X- Date: 2011-12-09