Download CE EMC TEST REPORT

Report No: 80820002-E
5 SETUP OF EQUIPMENT UNDER TEST
5.1. DESCRIPTION OF SUPPORT UNITS
The EUT has been tested as an independent unit together with other necessary accessories or support units.
The following support units or accessories were used to form a representative test configuration during the
tests.
No.
Equipment
Trade Name
Serial No.
FCC ID
Model No.
Data Cable
Power Cord
1
Load
N/A
N/A
N/A
N/A
Unshielded, 1.8m
N/A
2
Multimeter
DHA
DH-370B
N/A
N/A
Unshielded, 1m*2
N/A
Note: Grounding was established in accordance with the manufacturer’s requirements and conditions for the
intended use.
Page 9
This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.