Download User`s manual

through a new list (see List Trimming) or each individually from the “Active List: View
Samples” page (see Editing Information)
A
5.6.4 List Trimming
The trim list tool can be accessed from the top-right dropdown box on any view page by selecting
“Trim List” and pressing “Go”. This tool allows you to modify existing lists based on specified
criteria. You have two sets of functional options:
1. Results Destination
a. Edit
your active list be trimmed according to your criteria.
b. Save As
a new list will be created from your active list and your criteria. Your
active list will not be changed at all.
2. Trimming Action
a. Keep
Keep only those elements in the list that satisfy your criteria. (ex: if you
select Material Type: WGA, then your result list will have only WGA samples)
b. Remove
Remove all elements from the list that satisfy the criteria below. (ex: if
you select Material Type: WGA, then your result list will have not have any WGA
samples)
These options are presented in the top box of the Trim Tool screen (boxes A1 and A2
respectively) and each must be selected before you can continue. If you select to make a new list
(‘Save As’) you need to enter a name for your new list.
After selecting how the Trim Tool will work, you can specify your criteria in the lower fields (Box B
and lower). When you have finished your selections, scroll to the bottom of the page, select what
view of your resulting list you’d like to see, and click “Trim” to trim your list.
A1
A2
5.6.5 Sample Selector
See Tools: Sample Selector.
14