Download Operation Manual - Bosch Security Systems

134 en | Panels Admin
ALLPLEX Access Easy Master Controller
The screen below shows the schedule for 'Normal Schedule', which has been selected.
According to the schedule in 'Normal Schedule' above, when the mode Schedules and Holidays
will be used to unlock this door is selected, the door will unlock every Monday to Friday from
0830hrs to 1730hrs and every Saturday, Sunday, Regular Holiday and Special Holiday from
0830hrs to 1300hrs. However, with Only after a valid access condition is checked, the door will
only unlock after a valid access card is presented to the Reader during the schedule time
period. For example, on a Monday, the first person to present his card to the Reader arrives at
0845hrs. Therefore, the door will only unlock from 0845hrs to 1730hrs on that particular Monday, instead of from 0830hrs to 1730hrs.
16.3.4
Door Output Settings (For Entry Reader, Entry and Arm/Disarm Reader)
This parameter allows user to set the timer duration that is related to the door.
A screen of the Door Output Settings page is shown above.
Door Open Timer
This setting defines how long the door can be held open, after an access/exit is granted,
before the Panel registers it as Door Held Open transaction. If the reader has a built-in buzzer,
it will generate a beeping alert signal and will stop once the door is closed back. It can range
from 0 to 255 seconds. The factory default is 60 seconds.
Door Strike Timer
This setting defines the duration to de-energise the Door Strike when the Momentarily Unlock
command is sent via the Door Control web page or when an access/exit is granted.
When access is granted to a Cardholder, sufficient time must be given for the person to open
the door before the Panel locks it back again. It can range from 0 to 255 seconds. The factory
default is 5 seconds.
Ver 1.0.1 | 2012.10
Software Manual
Robert Bosch (SEA) Pte Ltd