Download SimNow User Manual

Transcript
AMD Confidential
User Manual
A.7.4
April 2009
CMOS
1 simnow> cmos.usage
Automation Command
Load <filepath>
Save <filepath>
SetTime <seconds> <minutes> <hours>
<days since Sunday> <day of the month>
<months since January> <years since 1900>
GetByte <addr>
SetByte <addr> <data>
GetData
GetRamSize
ClearTo <value>
A.7.5
Description
Loads CMOS data stored at „filepath‟. For
example „cmos.load c:\cmos.dat‟.
Saves CMOS data to „filepath‟, e.g. „cmos.save
c:\cmos.dat‟
Sets CMOS Time to specified time. For instance
„cmos.SetTime 00 00 12 00 31 12 14‟ sets the
CMOS time to Sunday December 31th, 2004, at
12:00:00.
Returns byte in CMOS that is stored at address
„addr‟.
Sets byte in CMOS at address „addr‟ to value
stored in „data‟.
Dumps complete CMOS.
Returns the CMOS RAM size in bytes.
Sets entire CMOS to specified value „value‟.
ACPI
1 simnow> acpi.usage
Automation Command
PowerButton
SleepButton
A.7.6
Description
Triggers PowerButton ACPI message.
Triggers SleepButton ACPI message.
Floppy
1 simnow> floppy.usage
Automation Command
SetFloppy <A/B(0|1)> <filename>
GetFloppy <A/B(0|1)>
EjectFloppy <A/B(0|1)>
A.7.7
Description
Assigns a floppy image file „filename‟ to drive
„A‟ or „B‟.
Returns the assigned floppy image file of drive
„A‟ or „B‟
The command will set the "Media Ejected" flag
of drive „A‟ or „B‟.
Debug
1 simnow> debug.usage
Automation Command
Enable
Appendix A
Description
Enables the Debugger and opens a debug dialog window, if GUI
is enabled.
231