Download 1. Basic Information about SPM Certus

This user guide is intended for installation and operation of a Scanning Probe Mi­
croscope Certus. Scanning Probe Microscope is a combination of XYZ scanner, canti­
lever tip sensor (deflectometer), SPM controller EG-3000 and software NSpec. Scan­
ning Probe Microscope Certus is used in NST devices: Certus Standard, Certus Optic,
Certus NSOM (model based on Certus Standard and Certus Optic), Centaur (HR) and is
used as a standalone tool for objects positioning.
Before installation and operation this appliance, please read the manual. On all
matters related to technical support and upgrades for this product, under the additional
features, contact the following addresses:
Phone:
+7 (495) 665-00-85
+7 (495) 642-40-68
+7 (495) 642-40-67
E-mail:
[email protected]
web:
www.nanoscantech.com
Skype:
NanoScanTech
“Nano Scan Technologies Ltd”
Certus – Scanning Probe Microscope. User manual
2