Download 1. Basic Information about SPM Certus

Transcript
Scanner calibration
Fig. 5.13 Test picture.
A
Zero point X(0)=0 μm. U(0)=1000 x (measured X in μm).
B
Point N, X(n)=n x T (μm), T — period. U(n)=1000 x (measured X in μm).
Fig. 5.14 Horizontal section.
Fill in the table of values of voltages and displacements as follows: for the zero
movement on the left, select the first point, which is uniquely characterized as the be­
ginning of a new period, a shift which will then be formed will be automatically coun­
“Nano Scan Technologies Ltd”
Certus – Scanning Probe Microscope. User manual
62