Download User`s Manual

BroadLighter-D Series User Manual
you to control the BroadLighter remotely from your PC system instead of standing in
front of the instrument for pressing the necessary front-panel pushbutton.
By using this program, you can do the following:

Activate and deactivated each SLD module individually.

Activate and deactivated both the SLD modules simultaneously.

Monitor the current status of the front-panel controls.

By simple clicking on the necessary button in the program window,
automatically measure and save all current values of the instrument's
performance parameters to a separate file on your PC which must be
forwarded to Superlum when you suspect problems with the
BroadLighter.
It is important to note that the last feature in the list above is accessible through
the program only.
The program features very simple installation, non-severe system requirements,
and a user-friendly interface. Use this program whenever you want to do the following:

To begin to control the BroadLighter remotely as soon as you receive it
and do not want to waste much time for developing the program of your
own.

In case of a problem: to test the instrument performance and report the
results of the test to Superlum for getting the necessary assistance.
4.4.2 Minimum System Requirements
Minimum system requirements are as follows:

Operating system: Windows 95, 95 OSR2, 98, or 98 SE, Windows ME,
Windows NT Workstation 4.0 Service Pack 3, Windows 2000 Professional,
Windows XP Professional

Memory: 32 MB for Windows 9x and ME, 64 MB for Windows NT and 128
MB for Windows 2000 and XP

Processor: Pentium 100 MHz (or faster) processor

Hard disk space: 2MB of free hard disk space.
-55-